Rackmount VA 2000 Guide de l'utilisateur télécharger pdf (Page 47)

OPERATION

Eaton

9130 UPS (700–3000 VA) User's Guide S 164201718 Rev 2

Table 2 shows the basic menu structure.

Table 2. Menu Map for Display Functions

Main Menu Submenu Display Information or Menu Function

UPS Status Main status (mode and load) / Notice or Alarm status (if any) /

Battery status (state and charge level)

Event Log Displays up to 127 events and alarms

The Event Log is also available through the serial port. See

“Retrieving the Event Log” on page 47.

Measurements Load W VA / Load A pf / Output V Hz / Input V Hz / Bypass V Hz /

Input Line Events / Battery V min

Control

Go to Bypass Transfers the UPS system to internal Bypass mode

When this command is active, the option changes to “Go to

Normal.”

Start Battery Test Starts a manual battery test

See “Testing New Batteries” on page 72.

Reset Error State Clears a “Battery Test Failed” alarm

Load Segments Load segment 1: ON | OFF

Load segment 2: ON | OFF

These commands overrule user settings for load segments. See

“Configuring Load Segments” on page 49.

Restore Factory

Settings

Returns all settings to original values

Identification UPS Type / Part Number / Serial Number / Firmware

Settings

User Settings See Table 3 for details.

Service Settings This menu is password-protected.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 118 119

Pas de commentaire

Rackmount VA 2000 Guide de l'utilisateur Page 47